Shenzhen Merrytek Technology Co., Ltd
|
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
250-700mA 2x25W DALI & 1-10v And PUSH Dimmable LED Driver, 123x79x23.5mm
Description:
1. Multi output current selectabel via DIP switch. The current is 250-700mA
2. No flickering
3. Press-in terminals in primary and secondary side, easy assembly
4, Built-in DALI interface and push dimming function .
5, Secondary dimming with 1-10v interface
6, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
7, Multi output current 250mA to 700mA selectable via DIP switch.
8, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
9, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
10, Maximum length of the cable, from push button to last driver is 20m
11, Protection: Short circuit / Over voltage / Over temperature
12, 5 years guaranty
Specifications
INPUT
|
Input voltage |
220-240Vac |
Input frequency |
50-60Hz |
|
Input current |
0.16A max |
|
Power factor |
≥0.90 |
|
Efficiency(Note1) |
≥85% |
|
Leakage current |
0.5mA/240Vac |
|
OUTPUT
|
Output current and load |
250mA 16~60V DC 2x15W max 350mA 16~60V DC 2x21W max 400mA 16~60V DC 2x24W max 450mA 16~60V DC 2x25W max 500mA 16~50V DC 2x25W max 550mA 16~46V DC 2x25W max 600mA 16~42V DC 2x25W max 700mA 16~36V DC 2x25W max |
Output load range |
2x25W max |
|
Current accuracy |
±5% |
|
Dimming mode |
DALI, PUSH,1-10v |
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50 |
Surface temp.(Tc) |
85max |
|
Working humidity |
20~90%RH non-condensing |
|
Storage temp. |
-40~80 |
|
Life time |
≥50000hours |
|
PROTECTION
|
Isolation class |
Class II, SELV |
Protection class |
IP20 |
|
Short circuit |
Protection type; auto rest |
|
Over voltage |
Protection type; auto rest |
|
Over temperature |
Protection type; auto rest |
|
SAFETY&EMC
|
Safety |
EN61347-1 EN61347-2-13 |
EMC |
EN55015, EN61000-3-2ClassC |
|
EN61000-3-3, EN61547 |
||
DALI interface |
IEC62386-101, IEC62386-102, IEC62386-207 |
|
Approvals |
CE |
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min |
|
NOTE |
1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp. |
Dimming Operation:
1-10V Dim
Use internal jumper to switch between 1-10V and Dali mode
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.