Electronic 50W 1-10V Dimmable LED Light Driver 350mA - 1050mA Switched By Jumper AIA-1 manufacturer from China Shenzhen Merrytek Technology Co., Ltd

Electronic 50W 1-10V Dimmable LED Light Driver 350mA - 1050mA Switched By Jumper

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: AIA-1

50W 1-10V Push dimmig led driver output current 350mA-1050mA selectable 123x79x23.5mm

Descr

50W 1-10V Push dimmig led driver output current 350mA-1050mA selectable 123x79x23.5mm

Description:

1.Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA. Also, the LED driver supply 12Vdc / 24Vdc output voltage for you selection.

2, with top circuit design AC-DC-DC, no flicckering in dimming 0%-100%

3,1-10V and push is selectable. And the primary push is always active

4, Dimming mode easily switched by Jumper1,Jumper2, Jumper3

5, Primary and secondary dimming with PUSH button.

6, Secondary dimming with 1-10V dimmer.

7, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.

8, Maximum length of the cable, from push button to last driver is 20m

9. No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.

10, Protection: Short circuit / Over voltage / Over temperature

11, Press-in terminals in primary and secondary side, easy assembly

12, 5 years guaranty

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Input current	0.26A max
	Power factor	≥0.90
	Efficiency(Note1)	≥87%
	Leakage current	0.5mA/240Vac
OUTPUT	Output current/voltage and load	350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC, 50W max
	Output load range	1x50W max
	Current accuracy	±5%
	Dimming mode	1-10V, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50
	Surface temp.(Tc)	85max
	Working humidity	20~90%RH non-condensing
	Storage temp.	-40~80
	Life time	≥50000hours
PROTECTION	Isolation class	Class I, SELV
	Protection class	IP20
	Short circuit	Protection type; auto rest
	Over voltage	Protection type; auto rest
	Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6
	EMC	EN55015, EN61000-3-2ClassC
	EMC	EN61000-3-3, EN61547
	Approvals	SEMKO, CE
	Withstand voltage	IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min
	Withstand voltage	OUT-FG:500VAC/5mA/1min
NOTE	1, Efficiency is measured at 1050mA/48Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp.