Shenzhen Merrytek Technology Co., Ltd
|
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Project Use1x40W 700mA-1050mA DALI And PUSH Dimmable LED driver, 200x40.5x22.9mm
Description:
1, Special For DALI and push dimming function .
2, Unique design for project application
2, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
3, Multi output current 700mA to 1050mA selectable via DIP switch.
4, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
5, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
6, Maximum length of the cable, from push button to last driver is 20m
7, Press-in terminals in primary and secondary side, easy assembly
8, Protection: Short circuit / Over voltage / Over temperature
9, 5 years guaranty
Specifications
INPUT
|
Input voltage |
220-240Vac |
Input frequency |
50-60Hz |
|
Input current |
0.26A max |
|
Power factor |
≥0.90 |
|
Efficiency(Note1) |
≥85% |
|
Leakage current |
0.5mA/240Vac |
|
OUTPUT
|
Output current and load |
700mA 20-60VDC 750mA 20~56V DC 800mA 20-53V DC 850mA 20-50V DC 900mA 20-46V DC 950mA 20-43V DC 1000mA 20-40V DC 1050mA 20-38V DC |
Output load range |
1x50W max |
|
Current accuracy |
±5% |
|
Dimming mode |
DALI, PUSH |
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50 |
Surface temp.(Tc) |
75max |
|
Working humidity |
20~90%RH non-condensing |
|
Storage temp. |
-40~80 |
|
Life time |
≥50000hours |
|
PROTECTION
|
Isolation class |
Class II, SELV |
Protection class |
IP20 |
|
Short circuit |
Protection type; auto rest |
|
Over voltage |
Protection type; auto rest |
|
Over temperature |
Protection type; auto rest |
|
SAFETY&EMC
|
Safety |
EN61347-1 EN61347-2-13 |
EMC |
EN55015, EN61000-3-2ClassC |
|
EN61000-3-3, EN61547 |
||
DALI interface |
IEC62386-101, IEC62386-102, IEC62386-207 |
|
Approvals |
CE |
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min |
|
NOTE |
1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp. |
Mechanical Specification:
Dimming Operation:
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.
Wring Diagram: